Seat conversion for BMW F800S, BMW F800ST & BMW F800GT

5件の商品

ワンピースシートの改良
ワンピースシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 279,65EUR 329.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW F800GT2013-2016, BMW F800GT2017-, BMW F800S2006-2011、BMW F800ST2006-2012に関する詳細情報

シート加工 for your BMW F800S, BMW F800ST & BMW F800GT

完璧に調整されたシートは、あらゆる走行距離をより快適にします。Hornigのシート加工サービスは、BMW F800S、BMW F800ST、BMW F800GT向けに、カスタマイズされたパッド調整、新しい張り替え、そしてオプションの快適性アップグレードを提供します。長距離ツーリングを計画している方、日常使用でより快適さを求める方、またはシートの人間工学を最適化したい方に最適です。

 

サービス概要

  • シート加工(一体型)– パッドのカスタム調整、形状や高さの変更が可能。
  • シートヒーター後付け – 2段階調整可能なシートヒーターの後付け(工場出荷時にヒーターが装備されていない場合)。
  • シートの張り替え – 滑り止めカバーによる見た目と機能の向上。
  • ユニバーサルシートクッション – 完全なシート加工を行わずに快適性を素早く改善するソリューション。

 

シートで調整可能な内容

  • パッドの硬さと形状:柔らかめ、硬め、または特定の圧力緩和ゾーン。
  • シート高:モデルや仕様に応じて個別調整(高さを上げる/下げる)。
  • 形状の変更:例として、骨盤部分を relief するためのくぼみや、足つきを良くするためのサイドのフラット化。
  • カバーと外観:標準の滑り止めカバー、オプションカラー、装飾ステッチや刺繍。

 

素材と外観

ベースとして、長期間のグリップと耐摩耗性を備えた頑丈で滑り止めのあるカバー素材を使用しています。ご要望に応じて、合成皮革のバリエーション、コントラストステッチ、または個別の刺繍デザインも可能です — 快適性と個性を兼ね備えています。

 

シートヒーター:後付けオプション

寒い季節でも快適さを妥協したくないライダーのために、Hornigはシートヒーター後付けを提供しています。このオプションは、工場出荷時にヒーターが搭載されていないモデルに特に適しています。

 

シート加工の注文方法

  1. 希望するサービスを選択してください(例:シート加工、張り替え、シートヒーター、またはシートクッション)。
  2. 該当するフォームに記入してください。
  3. 発送指示に従ってシートをHornigへ送ってください。受領次第、作業を開始いたします。

 

プロによるシート加工のメリット

  • 狙いを定めた緩和により、長距離走行時のしびれや圧力点を防ぎます。
  • 最適化された着座位置によりコントロール性と安全性が向上 — 特にスポーティな走行や市街地での頻繁なストップ時に有効です。
  • 張り替えとデザインによって価値を維持し、BMW F800S、BMW F800ST、BMW F800GTを新鮮な印象にします。

 

よくある質問

シートを送る必要がありますか?

はい — 加工を行うためには、シートを送っていただく必要があります。正しい発送および提出方法についてはフォームをご利用ください。

 

シート加工にはどのくらいの時間がかかりますか?

約2週間