Seat conversion for BMW F650GS (08-12), F700GS und BMW F800GS (08-18)

5件の商品

ワンピースシートの改良
ワンピースシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 279,65EUR 329.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW F650GS2008-2012, BMW F700GS2012-2016, BMW F700GS2017, BMW F800GS2008-2012, BMW F800GS2013-2016, BMW F800GS2017、BMW F800GSに関する詳細情報

BMW F650GS、F700GS & F800GS 用シート改造

あなたの BMW F650GS (08-12)、F700GS、または F800GS (08-18) の乗り心地を大幅に向上させたいですか?Hornig モーターサイクルアクセサリーでは、プロフェッショナルな シート改造 を提供しています:高品質なシートの改造、オプションでのシートヒーターの後付け、シートの張り替え、または実用的なユニバーサルシートクッション。各調整は、あなたのバイクと個人の好みに合わせて個別にカスタマイズされます。

 

BMW F650GS、F700GS & F800GS 用シート改造サービス – 快適性と走行の楽しさ

当社のカスタムメイドの シート改造 は、BMW Fシリーズの快適性を向上させます – 日常使用、長距離ツーリング、または長期旅行に最適です。フォームコアとカバーは、お客様の仕様に従って正確に形成されます:硬さ、輪郭、高さ、幅、およびオプションで尾骨の負担を軽減するための中空溝付き。改造はシングルシートおよびダブルシートの両方で可能で、オリジナルのシートパンを使用しており、パン自体の変更は行いません。

ご希望に応じて、2段階シートヒーター(15 W/30 W)を取り付け可能です。接続ケーブル、トグルスイッチ、配線図が含まれます。設置にはオートバイの電子知識が必要なため、専門のワークショップでの取り付けを推奨します。

 

Hornig の利点

  • 人間工学に基づいた快適性、身長、体重、個人の要望に合わせて調整。
  • 調整可能なシート高(+/-25 mm)で理想的な着座姿勢を実現。
  • カスタマイズされたフォームの硬さ、お客様の希望に応じて調整。
  • オプションの 中空溝 により尾骨への負担を軽減。
  • カバーはさまざまな色とステッチパターンから選択可能。
  • 2段階シートヒーター の取り付けが可能。
  • オリジナルのシートパンを使用するため、完璧なフィット感。

 

利用可能なシート改造製品

  • BMW F650GS (08-12) シングルシート改造 – 人間工学に基づいたパッドと快適なカバー。
  • BMW F700GS シート改造 – オプションのシートヒーターと中空溝付き。
  • BMW F800GS (08-18) ダブルシート改造 – 個別に調整、新しいカバーと強化フォームコア。
  • ユニバーサルシートクッション – すべての F モデルに適合し、追加の快適性を提供。

 

注意事項と制限

  • 改造は EU内のみで実施されます。非EU圏からの送付は、関税リスクと費用のため対象外です。
  • シートヒーターは標準装備でない場合のみ取り付け可能です。

 

注文手順

まず、シート改造用のオンラインフォームにご記入ください。承認後、オリジナルシートをお送りください。改造には約2週間かかります。その後、シートは丁寧に梱包され、直接お客様に返送されます。

 

なぜ Hornig でシート改造を選ぶのか?

Hornig では、最高水準の品質基準を組み合わせています:精密なフォーム構造、ぴったり合うカバー、そして美しい縫製。EU製で、シート高、輪郭、フォームの硬さについて個別に相談可能。長期的な快適性:人間工学に基づいた座席姿勢は背中と尾骨の負担を軽減し、長距離走行に最適です。

 

結論

Hornig のシート改造により、あなたの BMW F650GS、F700GS、または F800GS は、あなたに完全に合わせたオートバイになります。個別の快適性、高品質な仕上げ、実用的なソリューションにより、短距離でも長距離でも、すべてのライディングが快適な体験となります。