Seat conversion for BMW K1100RS, BMW K1100LT
5件の商品

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.
詳細を見る
通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.
詳細を見る
By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.
詳細を見る
通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.
詳細を見る
このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm
詳細を見るBMW K1100LT1991-1999、BMW K1100RS1992-1997に関する詳細情報
シート改造 – あなたの BMW K1100RS & K1100LT のために
伝説的な K1100RS / K1100LT モデルは、ツーリング時の快適さとスポーティな性能を兼ね備えています。しかし、多くのライダーは、クッション性の不足、不快なエッジ、またはシートが狭すぎると感じることがあります。Hornig でのカスタム設計による シート改造 により、快適性、フィット感、外観を的確に最適化できます — シートを広くまたは狭く成形するオプションも含まれています。
K1100RS / K1100LT 用の改造バリエーション
- フォーム最適化&輪郭調整 – 形状、深さ、エッジ、輪郭を調整し、バランスの取れたクッション性と自然なラインを実現します。
- 新しいカバー&カスタマイズ – 標準ではブラックの滑り止め素材を使用;オプションでカラーバリエーション、型押し、ロゴの追加も可能です。
- シートヒーター後付け – ライダーとパッセンジャー用の2段階加熱機能を追加し、改造内容と完全に組み合わせ可能です。
- ユニバーサルコンフォートクッション – 大掛かりな改造をせずに、すぐに快適性を向上させたい方への簡易ソリューションです。
- 幅の調整 – ご要望に応じて、シートを数ミリ単位で広くまたは狭く加工し、体格に最適なフィット感を実現します。
シート改造の流れ
- フォーム改造、新カバー、ヒーター、幅調整、またはその組み合わせからご希望の内容をお選びください。
- フォーム内で、硬さ、シート高、輪郭、幅などのご希望を入力します。
- シートを当社 Hornig にお送りください — 加工、発送、返送までをすべて当社が担当します。
素材とデザインオプション
シート改造 には、耐候性・耐摩耗性・滑り止め性に優れたカバー生地とフォームを使用しています。ご要望に応じて、コントラストステッチ、カラーポイント、またはオリジナル刺繍など、スタイルと快適性に合わせたデザインバリエーションも実現可能です。
技術情報と加工期間
改造の複雑さは、元の構造(例:取り外し可能なカバー、既存フォーム構造、ヒーターの有無)によって異なります。一般的には、発送と返送を含めた総期間は約2週間です。
K1100RS / K1100LT にシート改造が有効な理由
K1100シリーズは、走行の楽しさと快適さを提供しますが、純正シートは個々のライダーのニーズを完全には満たしません。圧力分布の改善、カスタムパッド構造、最適化された幅などの的確な調整により、次のような明確な利点が得られます:圧迫点の減少、よりリラックスした着座姿勢、コーナリングでの安定したサポート、そして長距離でも一貫した快適な座り心地。特に長距離ライダーにとって、その違いはすぐに実感できます。
FAQ – よくある質問
元のシートを送る必要がありますか?
はい — 改造、新しいカバー、ヒーターの追加、または幅調整を行うには、形状・寸法・取り付け位置を正確に調整するために、お客様の既存のシートが必要です。
改造にはどのくらい時間がかかりますか?
発送と返送を含む全工程で、通常は約2週間ほどかかります。
改造後、どのような違いを感じますか?
多くのお客様が、圧迫感の大幅な減少、しびれの軽減、よりリラックスした着座姿勢、コーナーでの安定性の向上、停止時の安心感を報告しています — しかも、K1100RS / K1100LT の特徴的なスタイルを損なうことはありません。
