Seat conversion for BMW K1300GT

5件の商品

フロントシート、リアシートの改良
フロントシート、リアシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) We advise against heightening the seat because of the shape of this motorcycle's seat! Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 229,00EUR 240.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW K1300GT2009-2011に関する詳細情報

BMW K1300GT用シートコンバージョン

もしあなたのBMW K1300GTの座り心地を大幅に向上させたい場合、Hornigによるプロフェッショナルなシートコンバージョンが最適です。シート高、パッド、カバーの個別調整により、あなたのニーズに完全に合わせたシートが完成し、長距離ツーリングでも快適さ、エルゴノミクス、ライディングの楽しさを提供します。

 

BMW K1300GTのための快適性とエルゴノミクスの向上

経験豊富な当社のアップホルスター(張り替え職人)が、BMW K1300GTのシートをより快適な座り心地と圧力分散の向上のために最適化します。ご希望に応じて、硬さ、形状、輪郭、シート高を正確に調整します。必要に応じて、尾骨の圧力を軽減するためのくぼみを組み込むことも可能です。すべての作業は元のシート上で行われ、完璧なフィット感と確実なサポートを保証します。

オプションで、寒い日でも快適な温かさを提供する2段階シートヒーター(15 W/30 W)を取り付けることができます。取り付けは電気知識を要するため、資格のある工場で行う必要があります。

 

Hornigの利点

  • 個別シート調整 – 体格、ライディングスタイル、快適性の要求に合わせて調整。
  • エルゴノミクスの改善 – 長距離ツーリングや日常の走行に最適。
  • シート高の調整 – 希望に応じて高くまたは低く調整可能(+/- 25 mm)。
  • 尾骨の圧力を軽減するためのオプションのくぼみ。
  • さまざまな素材、色、縫製スタイルのカバーが利用可能。
  • 寒い日に追加の快適さを提供するオプションのシートヒーター。
  • 高品質なクラフトマンシップと耐久性のある素材 – 長年のライディングを楽しめます。

 

注意事項と制限

  • コンバージョンは元のシート上でのみ行われ、交換システムは利用できません。
  • 当社のサービスはEU内のみで提供されます。非EU諸国からの発送は、関税およびコストの理由で除外されます。
  • 工場出荷時のヒーティングシステムがない場合にのみ、シートヒーターの設置が可能です。

 

注文手順

シートコンバージョンのオンラインフォームにご記入いただき、希望する変更(例:シート高、輪郭、硬さ、シートヒーター)をお知らせください。Hornigが詳細を確認し、フォームに返信します。この確認を受け取った後に、元のシートを当社に送ってください。コンバージョンには通常約2週間かかります。その後、シートは安全に梱包され、返送されます。

 

BMW K1300GT用のシートコンバージョン製品

  • シートコンバージョン – シート高、輪郭、パッドを個別調整し、最適な快適性を実現。
  • シート張り替え – さまざまな素材と色で新しいカバーに変更し、見た目も快適性も向上。
  • シートヒーター – 2段階の加熱機能(15 W/30 W)で寒い日でも快適に走行。
  • ユニバーサルシートクッション – 長距離ツーリング用の追加の快適性ソリューション。

追加料金でカスタムデザインも可能です:

  • 追加の合成皮革の種類
  • 追加の色
  • キルティングパターン
  • シート上の文字や数字(例:「GT」)
  • コントラストカラーのステッチ

 

なぜHornigなのか?

Hornigは長年にわたり、オートバイシートコンバージョンにおける品質、経験、クラフトマンシップの象徴です。精密な作業、高品質の素材、個別の相談を通じて、あなたとあなたのBMW K1300GTに完全にフィットするシートソリューションを提供します – 耐久性があり、快適で、見た目も美しいです。

 

結論

HornigによるあなたのBMW K1300GT用のシートコンバージョンは、快適性の向上、エルゴノミクスの改善、個別デザインを提供します。完璧に調整されたパッド、オプションのシートヒーター、高品質素材により、短距離でも長距離でも、すべてのライディングが本当の喜びになります。