Seat conversion for BMW R80G/S, BMW R80ST, BMW R80, BMW R80RT, BMW R80GS & BMW R80R

5件の商品

ワンピースシートの改良
ワンピースシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 279,65EUR 329.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW R80, BMW R80G/S, BMW R80GS, BMW R80R, BMW R80RT、BMW R80STに関する詳細情報

BMW R80G/S、R80ST、R80、R80RT、R80GS & R80R のためのシートコンバージョン

より快適に、より良いエルゴノミクス、そして個性的な外観を実現するためのオリジナルシート:私たちのシートコンバージョンカテゴリーでは、クラシックなBMW R80モデル専用にカスタムコンバージョン、張替え、快適性向上ソリューションをご用意しています。Hornigは精密な調整、専門的なシート加工、そしてアドバイスを提供し、ツーリングでも街乗りでもR80が快適に見え、快適に座れるようにします。

 

なぜR80にシートコンバージョンが必要なのか?

  • - シートのローダウンにより、足つき性が改善され、降車時の安全性が向上します。
  • - 長距離走行におけるリラックスしたライディングのための座り心地とポジションの改善。
  • - 外観のカスタマイズ:異なるカバー、コントラストステッチ、またはスタイルに合わせたオーダーメイドソリューション。
  • - 摩耗したシートの修復、または快適性と機能性を向上させたいオーナーへのソリューション。

 

Hornig のサービス & オプション

当社のサービス範囲は、R80シートに関する標準的なものからカスタムまで幅広く対応します:

  • - シートコンバージョン(一体型または分割型)および張替え。
  • - 快適パッド:柔らかめやスポーティーな充填材、さらに整形外科的オプション。
  • - シートヒーターの後付け(技術的に可能な場合)および互換性のあるヒートパッドの取付け。
  • - お客様の仕様(シートデータシートに基づく)に応じたカスタム製作、レザー調または本革仕上げ。

これらの多くのサービスは、自社工房または専門サドル職人との協力により提供されます。Hornigはアドバイス、発送手順、そして適合カバーやアクセサリーの便利なショップオファーを用意しています。

 

シート高オプション(標準、ローダウン、ハイアップ)

  • - 標準高さ(オリジナルシートの高さ)
  • - 最大–25 mmのローダウン(純正シートヒーター付きや既にローダウン済みの仕様では通常不可)
  • - 最大+25 mmのハイアップ(シートヒーター性能に影響が出る場合があります)

– シートデータシートの情報に基づいて調整します(個別のご要望も技術的に確認の上で対応可能です)。

 

手順 & サービス – シートコンバージョンの流れ

  1. - シート変更フォームに記入し送信してください – ご希望が実現可能か確認します。
  2. - 当社の確認後、シートをお送りください。
  3. - コンバージョン期間:約2週間(作業状況、素材や塗装作業、個別の要望により変動します)。

この標準化されたプロセスにより、明確なコミュニケーション、透明な見積り、計画的な納期が保証されます。Hornigのチームが一歩一歩ご案内します。

 

素材、加工 & 取付け

  • - 滑り止め、防水性カバー、頑丈な縫製、高い耐摩耗性。
  • - 長期間快適で均等な圧力分散を実現するプロフェッショナルなシート加工。
  • - 取付け時の注意点:接触面の清掃、固定具の確認、装着後の最終機能チェック。
  • - 塗装可能なカバーや装飾パーツは、ご要望に応じて取付け準備済みでお届け可能。

 

購入ガイド:適切なシートバリアントを選ぶには

  • - 走行スタイル: 市街地走行・短距離 → ローダウン/快適パッド;長距離ツーリング → エルゴノミック形状と厚みのあるパッド。
  • - シートヒーター: 後付けまたは保持する場合、ローダウン/ハイアップでの制限についてご案内します。
  • - 適合性: モデルや製造年(R80G/S, R80ST, R80, R80RT, R80GS, R80R)を確認してください – Hornigが適合を確認し、最適なソリューションを提案します。
  • - 予算計画: シンプルな張替えからフルカスタム製作まで – コストとメリットのバランスをお手伝いします。

 

FAQ – 短く & 明確に

シートコンバージョンにはどのくらい時間がかかりますか?

通常、注文確認後シート到着から約2週間です。塗装や特別なカスタマイズがある場合はさらに時間がかかることがあります。

シートヒーターとローダウンを併用できますか?

はい、多くの場合可能です。ただし、大幅なローダウン/ハイアップを行うと実際の加熱性能が変わる可能性があります。事前の技術相談とテストをおすすめします。

誰がバイクにシートを取り付けますか?

Hornigは改造済みシートを使用可能な状態で返送します。最終的な取付けはお客様ご自身または整備工場で行えます。ご希望に応じて詳細な取付け手順を提供します。

 

今すぐR80のシートコンバージョンを計画しましょう

BMW R80にもっと快適さ、より良いエルゴノミクス、そして個性的なデザインを与えましょう – Hornigのシートコンバージョンで実現できます。シート改造に関するアドバイスや価格については当社チームにご相談ください。Hornigは、選択、仕様の確認、そしてシート送付から完成品返送までのプロセス全体をサポートします。