Seat conversion for BMW R850C, BMW R1200C, BMW R1200C Independent, BMW R1200C Avantgarde, BMW R1200C Montauk

5件の商品

フロントシート、リアシートの改良
フロントシート、リアシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 223,55EUR 263.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW R1200C1997-2004, BMW R1200C、BMW R850C1998-2001に関する詳細情報

BMW R850C、BMW R1200C、および特別仕様車向けシートコンバージョン

BMW R850C、BMW R1200C、BMW R1200C Independent、BMW R1200C Avantgarde、または BMW R1200C Montauk のシート快適性とエルゴノミクスを、Hornig のプロフェッショナルなシートコンバージョンで向上させましょう。当社の専門は、オートバイシートの個別カスタマイズです:オーダーメイドのフォーム構造、新しいシート張り替え、オプションのシートヒーター、便利なユニバーサルシートクッションなど、すべてお客様の好みやクルーザーモデルに完璧に適合します。

 

快適性とエルゴノミクス:クルーザー向けカスタムシートコンバージョン

BMW R1200C シリーズのようなクルーザーモデルでは、シートの快適性とリラックスした走行が最優先です。当社は フォームコア を調整し、硬さ、輪郭、シート高 をお客様の仕様に合わせて変更することで、ライダーとパッセンジャー(該当する場合)の両方に大幅に改善された快適性を提供します。ご要望に応じて、二段階の シートヒーター(15 W/30 W)と接続部品の統合も可能ですが、電気接続はオートバイの電装知識を持つ専門ワークショップで行う必要があります。

 

Hornigシートコンバージョンの利点

  • 個別調整されたシート快適性 – ライダーとパッセンジャーの体格や走行スタイルに合わせて調整。
  • 調整可能なシート高 – より良い足つきと制御されたハンドリングを実現。
  • 最適化されたフォーム硬さ – 長距離ツーリングでも圧迫感なし。
  • オプションの ホロー輪郭 – 尾骨への負担を軽減。
  • さまざまな素材とカラーのシートカバーおよびステッチオプション。
  • プロフェッショナルな仕上げと耐久性のある素材 – 経験に裏打ちされた品質。

 

BMW R850C / R1200Cモデル向けのシートコンバージョンオプション

  • シートコンバージョン – ワンピースまたはツーピース(モデルにより異なる)で、個別に調整されたパッドとカバー付き
  • シートヒーター後付け – 二段階(15 W / 30 W)で快適性向上
  • シート張り替え – 新しいデザイン、新素材、見た目と手触りの向上
  • ユニバーサルシートクッション – 追加パッドで迅速に快適性を向上

 

デザインおよびカスタムリクエスト(追加料金)

追加料金にて、お客様の個別デザインの希望を実現可能です:追加の合成皮革の種類や色、装飾ステッチ、対照的な縫い目、または文字/数字の塗装(例:「Montauk」)。これにより、BMW R1200C のバリエーションに個性的なタッチを加えることができます。

 

重要な注意事項および制限

  • コンバージョンは、オリジナルシート にのみ実施されます。
  • ワンピースシートはツーピースに変換できず、その逆も同様です – 変更は常に既存のシートデザインに基づいて行われます。
  • すでに低いオリジナルシートが装着されている場合、25 mm のローダウンは不可能です。
  • パッドを減らした後、希望の快適性を確保するために、シートベースに少なくとも 30 mm のフォーム を残す必要があります。
  • シートベースのフォーム構造に応じて、若干の 幅調整(前方を狭く、後方を広くなど)が可能です。
  • シートヒーター は、工場出荷時にヒーティングシステムが搭載されていない場合にのみ後付け可能です。電気接続は資格のあるワークショップで行う必要があります。
  • 当社のサービスは EU内のみ で提供されます。非EU諸国からの送付は、税関および費用の理由で対象外です。

 

注文手順

シートコンバージョン のオンラインフォームにご記入いただき、硬さ、輪郭、シート高、デザインに関する希望の変更内容をご記入ください。内容を確認し、実現可能性についてご連絡します。この確認後にのみ、オリジナルシート をお送りください。通常、処理には約2週間かかり、その後シートは丁寧に梱包され返送されます。

 

なぜHornigなのか?

Hornig は、BMWオートバイアクセサリー とオーダーメイドの シートコンバージョン における経験豊富なパートナーです。長年のシート製作技術の専門知識と高品質素材、精密な仕上げを組み合わせ、快適性、エルゴノミクス、魅力的な外観を提供します。BMW R850C または R1200C モデルに最適です。

 

結論

Hornig による BMW R850C、BMW R1200C または特別仕様車(Independent、Avantgarde、Montauk)向けの シートコンバージョン は、快適性、エルゴノミクス、外観を向上させます。カスタム形状のフォームコア、選択可能なカバー、オプションのシートヒーターにより、お客様とクルーザーに完璧にフィットするシートを提供します。