Seat conversion for BMW S 1000 XR (2020- )

5件の商品

ワンピースシートの改良
ワンピースシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 279,65EUR 329.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW M1000XR、BMW S1000XRに関する詳細情報

BMW S 1000 XR(2020年以降)のためのシート改造 – Hornigによる快適性・人間工学・個性の融合

 

BMW S 1000 XR(2020年以降)専用カスタムシート

完璧にフィットしたシートは、快適さと走行の楽しさに欠かせません。特に長距離ツーリングではその違いが明確に感じられます。BMW S 1000 XR(2020年以降)用のシート改造カテゴリーでは、張替え、クッション調整、形状変更など、オーダーメイドのソリューションをご用意しています。Hornigは、高品質な素材、人体工学的な最適化、そしてカスタムデザインを提供し、あなたのXRがどんなシーンでも完璧にフィットするよう仕上げます – ワインディングロード、長距離ツーリング、日常走行などあらゆる場面で。

 

BMW S 1000 XR(2020年以降)のシート改造が価値ある理由

  • 人間工学の向上:長距離走行でも快適で安定したサポートを実現するシート形状。
  • シート高の最適化 – より良い接地性や足元スペースを確保するため、ローダウンまたはハイアップが選択可能。
  • シート幅の調整により、体格に合わせたより正確なフィッティングを実現。
  • 個性的な外観:素材、カラー、ステッチをお好みで選択可能。
  • Hornigによる高品質な職人技 – 耐久性、精度、そしてBMW S 1000 XR(2020年以降)に完全対応した仕上がり。

 

Hornigのサービス範囲 – 品質と多様性

BMW S 1000 XR(2020年以降)のためのシート改造は、多様なニーズに対応しています:

  • シート改造 – 一体型デザイン、新しいカバーとカスタムクッションを含む。
  • シートヒーター – オプションで後付け可能な加熱機能。
  • デザインオプション – 合成皮革、カラー選択、コントラストステッチ。
  • 幅と高さの調整 – シートデータシートに基づき、お客様の要望に合わせて個別対応。

 

BMW S 1000 XR(2020年以降)のシート高さと調整

  • 標準高さ:お使いのBMW S 1000 XR(2020年以降)の純正シート高に相当。
  • ローダウン:最大–25 mmまで調整可能 – 小柄なライダーに最適。
  • ハイアップ:最大+25 mmまで調整可能 – スポーティなライディングポジションと広い視界を実現。
  • 個別の幅調整:最適な接触感と圧力分散を実現するための人間工学的な設計。

 

シート改造のプロセス

  1. BMW S 1000 XR(2020年以降)用シート改造のオンラインフォームに入力してください。
  2. シートを当社にお送りください – 専門チームが改造を行います。
  3. 処理期間:約2週間(素材や作業内容により変動)。

この透明性の高いプロセスにより、安心して計画でき、短期間でカスタムシートを装着して再び走り出すことができます。

 

素材・職人技・組み立て品質

  • 耐久性と耐候性に優れたカバーマテリアルを使用し、滑りにくいグリップを確保。
  • 精密なステッチと高品質なクッションによる長時間快適な座り心地。
  • オプションのカラーデザインや装飾ステッチで、BMW S 1000 XR(2020年以降)に独自の個性をプラス。

 

最適なシートバリエーションを選ぶためのヒント

  • ツーリングライダー:長距離でも快適な、エルゴノミック形状と柔らかいクッション。
  • スポーツライダー:硬めのクッションと狭めのシート形状で、ダイレクトなライディングフィール。
  • 日常・街乗り:ローダウンと安定性の向上により、安全で扱いやすい操作性。

Hornigは、あなたに最適なソリューションを見つけるお手伝いをします – 個性的で快適、そしてBMW S 1000 XR(2020年以降)に完璧にフィットするシートを。