Seat conversion for your BMW motorcycle

5件の商品

フロントシート、リアシートの改良
フロントシート、リアシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 229,00EUR 240.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW K1, BMW K100, BMW K100LT86-91, BMW K100RS89-92, BMW K100RS/RT83-89, BMW K75C85-88, BMW K75RT, BMW K75S86-96, BMW R45, BMW R50, BMW R60, BMW R65, BMW R75, BMW R90、BMW R90S73-76に関する詳細情報

シート改造 for your BMW K1, BMW K75 & BMW K100

古いBMW Kモデル(K1、K75、K100)は、現代的で人間工学的に調整されたシートによって大きな恩恵を受けます。ターゲットを絞ったシート改造により、圧力ポイントを軽減し、着座姿勢を改善し、長距離ツーリングを大幅に快適にします — 愛車のオリジナルの外観を不必要に変えることなく。

HornigがKシリーズに提供する内容

  • シートコンバージョン(一体型または二分割):クッション形状を調整し、輪郭を変更し、シートの高さを微調整 – ライダーの快適性と足つきを考えたオーダーメイドの解決策。
  • 張り替え:滑り止め付きで耐久性のあるカバー(標準:黒)や、装飾ステッチやカラーアクセントを加えたカスタム仕様。
  • シートヒーター後付け:快適な2段階ヒーターをオプションで追加可能。
  • ユニバーサルシートクッション:完全な改造を行わずに迅速に快適性を向上。

プロセス:シート改造の流れ

  1. サービスを選択(シート改造、張り替え、シートヒーター)。
  2. オンラインフォームに記入し送信。
  3. 確認後、シートをHornigに送付 – 工場での作業および返送はHornigが対応します。

素材 & カスタマイズ

標準では耐候性・滑り止め機能を備えた張地素材を使用しており、長持ちするグリップと日常使用に最適です。ご希望に応じて、他の合成皮革バリエーション、コントラストステッチ、刺繍(例:モデルロゴ)なども対応可能で、BMW K1、K75、K100が最適な見た目と座り心地を実現します。

技術的注意事項 & 処理時間

シート構造によっては、後付け(例:シートヒーター)に追加作業が必要になる場合があります。時には張り替えやフォームコアの取り外しが必要です。発送、改造、返送を含めておおよそ2~3週間を予定してください。

K1 / K75 / K100にシート改造が特に有効な理由

Kシリーズは長距離ツーリング性能とクラシックな走行ダイナミクスを兼ね備えています。最適化されたクッション構造は明確な利点をもたらします:圧力分散の改善、しびれの軽減、停車時のコントロール向上、長距離走行でのよりリラックスした座り心地 — クラシックな快適性と現代的な人間工学を組み合わせたいライダーに理想的です。

FAQ – 簡単 & 実用的

シートを送付する必要がありますか?

はい — 改造、張り替え、またはヒーター後付けには既存のシートの送付が必要です。

改造にはどのくらい時間がかかりますか?

発送および返送を含め、おおよそ2~3週間を見込んでください。

より快適な座り心地の準備はできましたか? BMW K1、K75、K100に最適なクッションとカバー選びについて、喜んでご相談に応じます。