Seat conversion for BMW K1200RS, BMW K1200GT (1997-2005)

5件の商品

ワンピースシートの改良
ワンピースシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 279,65EUR 329.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW K1200GT2003-2005, BMW K1200RS1996-2000、BMW K1200RS2001-2005に関する詳細情報

シート改造 – あなたの BMW K1200RS & K1200GT (1997-2005) のために

K1200RS / K1200GT(1997〜2005年)モデル は、スポーツ走行も可能なツアラーとして知られています。しかし、純正シートはしばしば硬すぎたり、幅が狭すぎたり、長距離走行では快適性に欠けることがあります。Hornig による精密な シート改造 は、その問題を解決します。快適性を高め、着座姿勢を最適化し、疲労を軽減することで、より高いコントロール性、リラックスしたライディング、そして安全性の向上を実現します。

 

改造オプション

  • パッド調整と形状変更 – シートの曲面を修正し、前端部の圧迫を軽減し、座面を広げたり高さを調整したりします。
  • 新しいカバー/カスタマイズ – 標準では滑りにくく耐久性の高い素材を使用します。その他の色、質感、ロゴなどもオプションで選択可能です。
  • ヒーター追加 – 後付け可能な2段階ヒーターを装備し、寒い季節の走行時にも快適性を提供します。
  • コンフォートクッション(汎用) – 改造を行わずに即座に快適性を向上させます。

 

シート改造の流れ

  1. 改造内容を選択してください:パッド調整、新しいカバー、ヒーター追加、またはそれらの組み合わせ。
  2. オンラインフォームにて、硬さ・高さ・形状・希望仕様などの詳細を入力します。
  3. シートを当社に送付してください。改造を実施し、発送および返送を含めて対応いたします。

 

素材とデザインオプション

あなたの BMW K1200RS / K1200GT のために、耐候性・滑り止め性能に優れた高品質なカバー素材を使用しています。さらに、コントラストステッチ、カラーポイント、刺繍カスタムなど、見た目と機能を最適に両立させるデザインもご用意しています。(例:K1200RS & GT用改造では、標準として黒の滑り止め合成レザーを使用します。)

 

技術情報と処理時間

シートの構造(例:カバーが取り外し可能かどうか)や希望する改造内容(高さ調整、パッド、ヒーター追加など)により作業量は異なります。通常、発送と返送を含めた全体の期間は約2週間です。

 

なぜ K1200RS / K1200GT にシート改造が特に有効なのか

これらのシリーズはスポーティな性能とツアラーとしての快適性を兼ね備えています。しかし実際には、多くのライダーが圧迫感、不均等な荷重分散、動作の制限などに悩まされています。カスタムフィットのシートを使用することで、圧力分散が大幅に改善され、市街地走行や長距離ツーリングでもよりリラックスした姿勢で走行でき、コーナーでのコントロール性も向上します。特に長距離ライダーやツアラーの方々は、その違いを明確に感じるでしょう。

 

FAQ – よくある質問

純正シートを送る必要がありますか?

はい。改造、新しいカバーの装着、またはヒーターの追加を行うためには、お客様の既存のシートをお送りいただく必要があります。これにより、形状・取付ポイント・輪郭を正確に調整することが可能になります。

 

改造にはどのくらいの時間がかかりますか?

発送と返送を含めた全工程は通常約2週間です。詳細が確定した後に、確実な納期をお知らせいたします。

 

改造後、どのような違いを感じますか?

多くのお客様から、圧迫点の大幅な軽減、しびれの減少、よりリラックスした着座姿勢、コーナーでの安定したホールド感、停車時の安心感などが報告されています。これらはすべて、あなたの K1200RS / K1200GT (1997-2005) のスポーティでエレガントなキャラクターを損なうことなく実現されます。