フロントシート、リアシートの改良

BMW R1200GS & R1200GS Adventure モデル

詳細を見る
通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。

The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it.

The seat conversion is possible with different height options:

1: like the original seat
2: lower (up to -25mm)
3: higher (up to +25mm)

Many seats are also offered by BMW in a low version - these cannot be lowered further.

By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost.
Example modifications: Examples of seat modifications

Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired.
Your data sheet: Please fill in and send to us!

Your seat will be modified - it must be sent in!
The modification will take about 2 weeks.

Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form.

If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion.
The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation.
After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included.
The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

Rider seat conversion black

品番 sitzF
特別価格 EUR 229,00 通常 EUR 240.00
税込, 送料別
USD: $251.72GBP: £191.40AUD: A$375.06JPY: ¥40,267
納期: しばらくお待ちください。

Passenger seat conversion black

品番 sitzS
特別価格 EUR 199,75 通常 EUR 235.00
税込, 送料別
USD: $219.57GBP: £166.95AUD: A$327.15JPY: ¥35,124
納期: しばらくお待ちください。

Rider seat conversion black with installation of seat heating

品番 sitzF-sitz.heiz
特別価格 EUR 357,00 通常 EUR 420.00
税込, 送料別
USD: $392.41GBP: £298.38AUD: A$584.69JPY: ¥62,775
納期: しばらくお待ちください。

Passenger seat conversion black with installation of seat heating

品番 sitzS-sitz.heiz
特別価格 EUR 332,00 通常 EUR 415.00
税込, 送料別
USD: $364.93GBP: £277.49AUD: A$543.75JPY: ¥58,379
納期: しばらくお待ちください。

商品についての質問

私のシートをドイツに送る必要がありますか?
はい、シートの改良のために、シートをお送り頂く必要があります。

レビュー


未レビューの商品はありません


製品安全情報



関連・おすすめ商品

ヴァリオケース用インサイドバッグ
ヴァリオケース用インサイドバッグ

BMW R1200GS モデル

ヴァリオケースのトップケース、パニアケースの内部に使用し、荷物の出し入れ、持ち運びを容易にするインサイドバッグです。タンクバッグのようにサイズを変更することも可能です。バッグの外側のポケットは、小物や数枚の紙類を入れるのにお使いいただけます。持ち運びに便利なショルダーストラップもついています。撥水です。右側用のバッグは、BMWヴァリオ・トップケースのインサイドバッグとしてもお使いいただけます。

EUR 56,90

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る