Seat conversion for BMW R 1250 RS

5件の商品

フロントシート、リアシートの改良
フロントシート、リアシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) BMW R1250RS is also available with factory seat heating. This results in the following restrictions: Lowering the seat (-25 mm) is not possible due to the heating integrated in the seat. When making the seat higher (+25mm), the additional foam reduces the heat output. Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 229,00EUR 240.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW R1250RSに関する詳細情報

シート改造 for your BMW R 1250 RS – Hornigによる人間工学、スタイル、快適性

 

スポーティな快適性と完璧なコントロールのためのシート改造

Hornigのプロフェッショナルなシート改造により、BMW R 1250 RSの快適性とハンドリング性能を最大限に引き出すことができます。熟練した職人が、お客様の体格、着座姿勢、ライディングスタイルに合わせてシートを調整します。パッドの厚み、形状、傾斜を的確に調整することで、ダイナミックな操作性と長距離走行での快適性の最適なバランスを実現します。

 

精密に調整されたシートの仕上げ

Hornigでは、すべてのシートをお客様のご要望に合わせて再加工します。シートの高さに加え、シートの幅も変更可能です。例えば、スポーティな走行時の動きやすさを高めるために狭くしたり、リラックスしたツーリングでのサポートを向上させるために広くすることができます。高品質でグリップ性の高い表皮素材と精密な職人技により、耐久性があり、BMW R 1250 RSに完璧にフィットする調和のとれた仕上がりを提供します。

 

追加装備によるさらなる快適性

寒い気候でもR 1250 RSを快適に楽しみたい方には、オプションでシートヒーターの後付けが可能です。心地よい温かさを提供し、寒冷時の快適性を一段と高めます。さらに利便性を追求するなら、Hornigが提供するユニバーサルシートクッションもおすすめです。この多機能アクセサリーは圧力を分散し、通気性を改善し、背骨をサポートします。長距離ツーリングや通勤、気候の変化する地域での走行に理想的です。

 

BMW R 1250 RSのシート改造オプション

Hornigでのシート改造では、多くの詳細をカスタマイズできます:

  • シート高さの調整 – 最適な足つき性またはスポーティなポジションの実現
  • シート幅の変更 – 個別の人間工学と快適性に対応
  • パッドの密度、形状、傾斜の最適化
  • 素材、ステッチ、カラーの選択
  • シートヒーターの後付けによる快適性の向上
  • ユニバーサルシートクッションの使用による柔軟なサポート

 

Hornigのシート改造によるメリット

Hornigのカスタムシートには、多くの利点があります:

  • 最大限のコントロールを実現する人間工学的に最適化された着座ポジション
  • 長距離走行での快適性の大幅な向上
  • 職人による高品質な仕上げと耐久性のある素材
  • シートヒーターとパッド調整による快適性の向上
  • 実用的なユニバーサルシートクッションによる柔軟な着座体験

 

Hornigでの改造プロセス

手順は非常にシンプルです:

  1. オンラインフォームでシートの高さ、幅、カバー、希望するオプションを選択します。
  2. シートをHornigに送付します。
  3. 約2〜3週間後にカスタマイズされたシートが戻ってきます – すぐに使用可能で、快適かつあなたにぴったりの仕様です。

 

今すぐBMW R 1250 RS用のシート改造を始めましょう

Hornigのオーダーメイドシート改造で、快適性、操作性、走行の楽しさを高めましょう。スポーティなチューニング、シートヒーターの追加、または快適なユニバーサルシートクッションなど、あらゆる冒険に対応できるようBMW R 1250 RSを仕上げます。お客様のライディング体験を完全にカスタマイズするために、専門スタッフが丁寧にご相談に応じます。