Seat conversion for BMW R850R, BMW R1100R, BMW R1150R und BMW R1150R Rockster

5件の商品

フロントシート、リアシートの改良
フロントシート、リアシートの改良

通関手数料が発生するため、EU 以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU外からシートを発送するお客様には、「シートの改良」サービスをご提供することができません。 The seat is modified according to your individual needs. Based on your information on our seat data sheet, we can adapt the seat to you in terms of hardness, contour and height. Among other things, a groove (deepened middle of the seat) is possible, which noticeably relieves the coccyx if there are problems with it. The seat conversion is possible with different height options: 1: like the original seat 2: lower (up to -25mm) 3: higher (up to +25mm) Many seats are also offered by BMW in a low version - these cannot be lowered further. By default we use non-slip black synthetic leather and black stitching for the seat conversion (other colors are also possible). Several colors or different types of imitation leather, lettering and other customizations are possible at an additional cost. Example modifications: Examples of seat modifications Please fill out the seat change form and send it to us. Please wait for our confirmation before sending the seat to us. In this way you can avoid unnecessary shipping costs if a conversion cannot be carried out as desired. Your data sheet: Please fill in and send to us! Your seat will be modified - it must be sent in! The modification will take about 2 weeks. Each image of the service "seat conversion" can of course only be an example! Seams are not always possible with very soft seats, for example! Our upholsterer can only decide whether a seam needs to be incorporated or not after he has received the information on your form. If there is no seat heating as standard, an accessory seat heating can be retrofitted with the seat conversion. The retrofit includes the installation of a 2-stage (15W/30W) seat heater and all connection parts required for operation. After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model. We assume no guarantee for a seat heater is already installed. If the seat heating worked before the seat conversion, it will also work after the seat conversion.

EUR 229,00EUR 240.00

税込, 送料別

詳細を見る
シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
Examples for seat conversion
Examples for seat conversion

By default, we use non-slip black synthetic leather and black stitching for the seat conversion. However, it is also possible to customize the appearance of the seat at an additional cost. Optional seat conversion options: - other type of synthetic leather - another leather color - stitching - paint letters or numbers on the seat, for example "XR" - different colored seams Prices and other example images can be found here: Examples for seat conversion Please let us know by email which extras you would like for your seat conversion. We will then check whether the seat conversion is possible as desired and inform you of the total price.

詳細を見る
New cover for seat
New cover for seat

通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。. If your seat cover is damaged or worn, we can equip your seat with a new cover. For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious. By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost. The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! Your seat will be changed - it must be sent in! The change takes about 2 weeks. The illustrations of the service "new cover for seat" are examples! Whether a seam has to be worked in or not depends on the condition of the seat. Our upholsterer will make the new cover similar to the original cover as far as possible.

EUR 126,00EUR 140.00

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る

BMW R1100R1994-2000, BMW R1150R2001-2006, BMW R1150R, BMW R850R1994-2002、BMW R850R2003-2006に関する詳細情報

BMW R850R、BMW R1100R、BMW R1150R & BMW R1150R Rockster 用シート改造

Hornigによるプロフェッショナルなシート改造で、BMW R850R、BMW R1100R、BMW R1150R、またはBMW R1150R Rocksterのシート快適性を向上させましょう。BMWモーターサイクルアクセサリーのスペシャリストとして、当社はカスタマイズされたソリューションを提供しています。正確なシート加工、張替え、シートヒーターの後付け、実用的な汎用シートクッションなど、すべてお客様の純正シートとライディングスタイルに合わせて個別に調整いたします。

 

Rシリーズ用カスタムシート調整

BMW Rシリーズ用のシート改造は、エルゴノミクス、クッション性、シート高を最適化します。日常走行、ツーリング、スポーツライディングのいずれにも理想的です。フォームコアを再成形し、硬さ、形状、およびシート高を正確に調整します。ベースフォームの構造に応じて、前部を細く、後部を広くするなど、幅の微調整も可能です。ご希望に応じて、二段階式のシートヒーター(15W / 30W)を配線付きで組み込むことができます。接続はモーターサイクル電装の知識が必要なため、専門の整備工場で行うことをお勧めします。

 

利用可能なシート改造オプション

  • シート改造(一体型または分割型) – 個別調整されたクッションとカバー
  • シートヒーター後付け – 二段階式(15W / 30W)
  • シート張替え – 新デザイン、新素材、快適性の向上
  • 汎用シートクッション – 長距離ツーリングでの即効的な快適性アップ

 

デザインと特注リクエスト(追加料金)

追加料金にて、お客様のシートに対する個別デザインのご希望を実現できます。合成皮革の種類やカラーの追加、装飾的なステッチ、文字や数字(例:「Rockster」)の塗装、コントラストのある縫い目などに対応可能です。これにより、お客様のシート改造は唯一無二のスタイルとなります。

 

注意事項と制限

  • 改造はお客様の純正シートにのみ実施いたします。交換品や他社製シートは対象外です。
  • すでにロウシートが装着されている場合、25mmのローダウンは行えません。
  • 快適性を保つため、クッションを薄くする場合でも30mm以上のフォームを残す必要があります。
  • 一体型シートを分割型に、またはその逆に改造することはできません。既存のシート形状を基に加工します。
  • 幅の調整はフォーム構造に依存し、限定的にのみ可能です。
  • シートヒーターは純正ヒーターが装着されていない場合のみ後付け可能です。電気接続は専門工場で行ってください。
  • 本サービスはEU域内のみで提供しており、関税やコストの理由から非EU諸国からの発送は対象外です。

 

ご注文の流れ

オンラインフォームにてシート改造の詳細をご記入ください。硬さ、形状、シート高、デザインなどのご希望をお知らせいただければ、Hornigが内容を確認し、実施可能かをご案内します。確認後に純正シートをお送りください。通常、加工には約2週間かかります。完了後、丁寧に梱包された改造済みシートをお届けします。

 

Hornigを選ぶ理由

Hornigは、長年のBMWモーターサイクルアクセサリーの経験と、正確な張り加工技術、高品質素材を融合しています。BMW R850R、R1100R、R1150R、およびR1150R Rockster用のシート改造は、快適性の向上、エルゴノミクスの改善、美しい外観を実現し、お客様のライディングスタイルに完璧にフィットします。

 

まとめ

HornigのBMW R850R、BMW R1100R、BMW R1150R、およびBMW R1150R Rockster向けシート改造は、快適性、エルゴノミクス、長距離走行性能を向上させます。カスタム成形されたフォームコア、高品質なカバー、オプションのシートヒーターにより、あなたとバイクにぴったり合う理想的なシートを手に入れることができます。