New cover for seat

全モデル

詳細を見る
通関手数料のため、EU 以外の国からの座席の提出は受け付けられません。 したがって、EU 圏外から座席を送付する必要がある場合は、残念ながら「座席の新しいカバー」というサービスを提供できません。.

If your seat cover is damaged or worn, we can equip your seat with a new cover.
For example, if you have your rider's seat reupholstered by us, it can also make sense for visual reasons to have the passenger seat covered with the same artificial leather so that the overall result looks harmonious.

By default, we use non-slip black synthetic leather and black stitching for the seat cover (other colors are also possible). Several colors or different types of synthetic leather, lettering and other customizations are possible at an additional cost.

The original seat cover must be removed, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 2). Attention: If the cover is glued, a new seat cover can only be realized as part of a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))!

Your seat will be changed - it must be sent in!
The change takes about 2 weeks.

The illustrations of the service "new cover for seat" are examples!
Whether a seam has to be worked in or not depends on the condition of the seat.
Our upholsterer will make the new cover similar to the original cover as far as possible.

New cover for one-piece seat bench, black

品番 bezug-sitzbank
特別価格 EUR 126,00 通常 EUR 140.00
税込, 送料別
USD: $138.50GBP: £105.31AUD: A$206.36JPY: ¥22,156
納期: しばらくお待ちください。

New cover for rider or passenger seat, black

品番 bezug-sitz
特別価格 EUR 89,90 通常 EUR 99.90
税込, 送料別
USD: $98.82GBP: £75.14AUD: A$147.24JPY: ¥15,808
納期: しばらくお待ちください。

New cover for rider seat BMW R850/1200C, R1200CL, K1200LT, R18, black

品番 bezug-sitzF-spezial
特別価格 EUR 107,95 通常 EUR 127.00
税込, 送料別
USD: $118.66GBP: £90.22AUD: A$176.80JPY: ¥18,982
納期: しばらくお待ちください。

New cover for passenger seat BMW K1200LT, black

品番 bezug-sitzS-spezial
特別価格 EUR 107,95 通常 EUR 127.00
税込, 送料別
USD: $118.66GBP: £90.22AUD: A$176.80JPY: ¥18,982
納期: しばらくお待ちください。

商品についての質問

私のシートをドイツに送る必要がありますか?
はい、シートの改良のために、シートをお送り頂く必要があります。

レビュー


未レビューの商品はありません


製品安全情報



関連・おすすめ商品

シートヒーターの後付け
シートヒーターの後付け

通関手数料が発生するため、EU以外の国からのシートの発送をお受けすることができません。大変申し訳ありませんが、EU域外からシートを発送するお客様には、「シートヒーターの後付け」サービスをご提供することができません。 Retrofitting a 2-stage (15W/30W) seat heater for seats that do not have seat heating as standard. Possible either only in the rider's position or in the rider's and passenger's position. The original seat cover must be removed for installation, which is why it must not be glued to the foam core! Check whether the cover can be lifted off the foam core! To do this, pinch the cover between your thumb and forefinger and try to lift it (see figure 4). Attention: If the cover is glued, the seat heating can only be retrofitted in combination with a seat conversion (see seat conversion (one-piece seat) / seat conversion (two-piece seat))! After installing a seat heater, the cable for the power supply is led out under the seat shell (approx. 20 cm long with plug connection). You will receive an approx. 120cm long connection cable with a two-stage, round built-in toggle switch (diameter approx. 20mm) for each heated seat position. The connection to the electrical system of your motorcycle should be carried out by a specialist workshop, knowledge of motorcycle electronics is required! A circuit diagram is included. The seat heater will be installed on your seat - you have to send it in! The change takes about 2-3 weeks. The illustration of the lead-through of the connection cable is an example. The location of the grommet may vary depending on the seat and model.

EUR 216,75EUR 255.00

税込, 送料別

詳細を見る
10 mmローダウン用ゴムバッファー
10 mmローダウン用ゴムバッファー

BMW R1250GS モデル

純正シート下のラバーバッファーを交換することで、シート高を約10mm下げることができます。ラバーバッファーは工具を使わず簡単に交換できます。ラバーバッファーの穴はオフセットされています。シートを下げるには、薄い側を上向きにして取り付けてください(画像2参照)。

EUR 14,90

税込, 送料別

詳細を見る
ユニバーサル・シートクッション
ユニバーサル・シートクッション

このユニバーサル・シートクッションは、背中と臀部の負担を軽減することで、乗り心地を向上させ、よりリラックスして快適な乗り心地を実現します。柔らかく膨らませるTPUインナーパッドは、通気性のある黒い生地で覆われており、最適な座り心地を提供します。2つの一体型バルブのおかげで、空気圧を個別に調整して、個人の好みに応じて座り心地を最適化できます。 バイクのサドルの下を通る2本のストラップは、CAMフックで固定され、しっかりと固定されます。滑り止めの裏面により、サドルを安定して保持します。クッションは、体重130kgまでのライダーに適しています。この実用的なアクセサリーは、長距離のバイクツーリングをさらに快適にします。 長さ:約38cm 背面の幅:約35cm 前面の幅:約15cm

EUR 91,90

税込, 送料別

詳細を見る